| ------- geany
/etc/apt/sources.list ---- #deb https://legacy.raspbian.org/raspbian/ buster main contrib non-free rpi deb https://legacy.raspbian.org/raspbian/ buster main contrib non-free ---------------- sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 9165938D90FDDD2E ---------------- apt-get update orangepi@orangepipc:~$ sudo apt-get install dillo ssh x11vnc vsftpd nginx xfe mc ---------------- /usr/sbin/adduser seta /usr/sbin/usermod -a -G www-data seta -------------------------------------- dip:x:30: www-data:x:33:seta backup:x:34: --------------- chown -R seta:seta /var/www/html chmod ugo+rx /var/www/html ----------------IP FIJA---------------------------------- geany /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.1.70 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 8.8.8.8 post-up echo "Interface eth0 levantada con exito" post-down echo "Interface eth0 bajada con exito" -----------------SERVIDOR FTP----------------------------- geany /etc/vsftpd.conf listen=NO listen_ipv6=YES anonymous_enable=NO local_enable=YES write_enable=YES dirmessage_enable=YES use_localtime=YES xferlog_enable=YES connect_from_port_20=YES local_umask=022 secure_chroot_dir=/var/run/vsftpd/empty pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key ssl_enable=NO ------------------------ ----------SERVIDOR VNC--------------------- --ESTO SE HACE COMO USUARIO NORMAL-- CONTRASEÑA x11vnc -storepasswd En Xfce añadir un arraque automático: Exec=x11vnc -forever -usepw -display :0 -ultrafilexfer ---------Para utilizar el terminal serie--------------------- apt-get install python-serial apt-get install python3-matplotlib apt install python3-pip apt install python-serial python3-serial chmod 777 /dev/ttyUSB0 usermod -a -G dialout seta /usr/sbin/usermod -a -G dialout seta sudo apt install xterm |